Slotted Deflection Track - Sanders Steel Manufacturing.
Slotted Track | Steeler Construction Supply.
SLOTTED TRACKS STRUCTURAL FRAMING.
Slotted Deflection Track.
CEMCO CST Slotted Tracks | CEMCO.
True-Action Slotted Track - Telling Industries.
Rapid Track Slotted Deflection Track - Studco USA - Studco Systems US.
Absorbing Vertical Movement with Slotted Track - MarinoWARE Steel.
PDF Industry Technical Note Cold Formed Steel Construction April 2000 - Ssma.
Deep Leg Deflection Track System - ClarkDietrich.
Slotted deflection track dimensions.
Slotted Track Systems For Metal Framing - Dass Metal Products.
MaxTrak® Slotted Deflection Track | ClarkDietrich Building.

Slotted Deflection Track - Sanders Steel Manufacturing.

Deflection assembly. The track within a track allows the stud at the top of the wall to be attached to the inside track to provide a more uniform load transfer to the outside deflection track flange, and to stabilize the studs against rotation. OBSERVATIONS With the nested track attached to the stud flange (see Figure 1) the load transfer is. The Bailey Multi-Slot Track is an economical deflection system designed to provide complete flexibility. Allows for fast, easy and flexible stud installation. Pre-punched 1½" slots are spaced 1" o.c. to accommodate any stud spacing 2½" leg height for added strength and improved performance Reduces required material Reduces labour costs.

Slotted Track | Steeler Construction Supply.

Deflection Track Slotted Deflection Track Vinyl Trims and Beads 1-1/4 inch Vinyl Corner Bead 1-1/4 inch Flexible Vinyl Corner Bead 3/4 inch Bullnose Vinyl Corner Bead 3/4 inch Flexible Bullnose Vinyl Corner Bead Paper-faced Inside Corner Trim Paper-faced Metal Corner Bead Vinyl J-Trim Vinyl L-Trim Vinyl L-Trim with Tear Strip. UL Classified in over 80 approved fire-rated systems Standard Slotted Track allows up to 1½” of vertical movement Custom shapes and slot sizes available Custom widths and thicknesses available Positive attachment provided for wall strength Absorbs head-of-wall and floor extension or compression movement Integrated with traditional wall systems.

SLOTTED TRACKS STRUCTURAL FRAMING.

3" Leg MaxTRAK has 2" long slots with a total allowable vertical (deflection) movement of 2" (1"±) Total allowable horizontal (drift) movement of 4" (2"±) (MaxTrak 2D only) One-piece system reduces the cost of materials and labor Easy installation reduces labor costs Fire-rated system integrates with a variety of UL® head-of-wall fire stop systems. In addition, Rapid Track also has slots in the track to allow for horizontal drift when required by seismic designs. Available in 3000mm Leg lengths and a variety of track widths from 64mm to 150mm. Rapid track is easy to install and reduces the cost of materials and labor. The single long leg track assembly requires 1-1/2" cold-rolled channel and 1-1/2" x 1-1/2" 16-gauge EasyClip™ Clip Angles (U-Series™) (or other bridging method) installed continuously throughout the uppermost punch-outs to align the studs vertically within the plane of the wall.

Slotted Deflection Track.

The Bailey Multi-Slot Track is an economical deflection system designed to provide complete flexibility. Allows for fast, easy and flexible stud installation. Pre-punched 1½" slots are spaced 1" o.c. to accommodate any stud spacing 2½" leg height for added strength and improved performance Reduces required material Reduces labour costs. Learn about all CEMCO CST Slotted Tracks products here!... CEMCO CST Slotted Track with 3-1/4" Legs (2" slots) View Category. CEMCO CST Slotted Track with 6" Drift.

CEMCO CST Slotted Tracks | CEMCO.

Legs are 2-1/2" long with 1-1/2" slots every 1" on center. Standard length is 10', but custom orders are welcome. For more specifications, including Section Properties, see our Support section. You may also be interested in Wafer Head Drillers The Screw for Interior Finishing. Period. SANDERS STEEL FRAMING Slotted Deflection Track provides a means for quick and simple steel stud installation. Our deflection track has 2-1/2 flanges with 1-1/2 slots. SCW Head-of-Wall Slide-Clip Connector | Simpson Strong-Tie. For SI: 1 inch = 25.4 mm, 1 foot = 304.8 mm, 1 mile per hour = 0.447 m/s; 1 ksi = 6.895 MPa. 76mm (w) x 50mm (h) Slotted Deflection Head Track BMT: 1.15 | Stock Pack: 50 | Sub Pack: 1 Special Order Length: 3000mm. S683 92mm (w) x 50mm (h) MAXItrack ® Slotted Deflection Head Track BMT: 1.15 | Stock Pack: 50 | Sub Pack: 1 Available Lengths: 3000mm. S690 150mm (w) x 50mm (h) MAXItrack ® Slotted Deflection Head Track.

True-Action Slotted Track - Telling Industries.

For every project in the country, MRI Slotted Track is the BuildSmart choice for contractors and owners. Please call 630-616-1850 to order your Slotted Track Deflection Track today! Gauge: 30, 33, 43, 54, and 68 mil (20-14 ga). Slotted Deflection Track - Interior is a product in the Structural Metal Stud Framing Tracks category that meets ASTM C645, A653, C955, A1003. Find submittal-ready datasheets, SDS, specs, ICC-ES reports. Used in wall assemblies allowing for vertical deflection of floor beams or floor decks above the interior partitions. Custom-made flange depth varying from 50 to 100mm suitable for vertical deflection movement exceeding 30 mm. Used for a wall height above 3.5m Physical Properties Depth: 50mm AND 64mm Width: 50-200mm Thickness: 0.9mm Perforations width: 6mm Distance between perforations: 25.4mm.

Rapid Track Slotted Deflection Track - Studco USA - Studco Systems US.

"The System™" slotted deflection track is a patented head-of-wall structure that cycles and is fire resistant. This single track system provides a fast and economical head-of-wall installation providing a secure installation (positive attachment). No cut-ins, no caulking, no spray-on fireproofing, and no elastomeric coating needed.

Absorbing Vertical Movement with Slotted Track - MarinoWARE Steel.

Download Datasheet Enquire about this product. Product Details. FAQ's. Also known as 'Slotted Deflection Cleats', Slotted Deflection Brackets are used at the head of track to stud installations and allow for deflection. Product Code. Product Information. Sub Pack. Stock Pack. M103. 2. Lateral bracing is required within 12" of deflection track to prevent wall studs from rotating. 3. Values are based on equations from AISI North American Standard for CFSF- Wall Stud Design (S211-07). 4. Stud failure modes relating to the deflection track connection (shear, web crippling, etc.) must be checked separately. ASTM & Code.

PDF Industry Technical Note Cold Formed Steel Construction April 2000 - Ssma.

Steel Stud & Track Wall Framing System | Rondo.(888) 248-8076 Product Data Slotted Track - BuildSite.Rapid Track Slotted Deflection Track - Studco USA.Slotted Track - Gypsum Supply.Interior Framing: Fire-Rated Systems | ClarkDietrich Building.Slotted Deflection Track: Internal & External Wall - Studco.MaxTrax1.ICC-ES Evaluation Report ESR-2012 - CEMCO.Deep Leg De